Remote control adapter, infrared adapter, remote control receiver, remote control receiving part, usb adapter, cir adapter, ps/2 adapter, uart adapter, rs232 adapter, rs485 adapter, i2c adapter

Infrared remote control, wireless keyboard with trackball or touchpad
Customized mini pc included industrial pc, htpc and thin client
Mini-itx motherboard, dom, ssd, pc chassis and power supply

>>Your Current Position: Remote Receiver or Infrared Receiver for PC

-->> Remote Receiver or Infrared Receiver for PC <<--

We can provide four kinds of external infrared receiver, interface mode included: com(RS232 serial port), ps/2, dual ps/2 and usb.

We can provide two kinds of external receiver box, included JH(left) and JM(right).

And we also can provide OEM/ODM service, customized PCB receiver according to customer's requirements.

Interface explained in detail

Interface	Pictures	Note
NONE	-	Provide infrared encoding format, the client to do the decoding.
IC		We can provide all kinds mcu as the IR decoding IC, included SOP8, DIP8, SOP14, DIP14, SOP20, DIP20 and SOP28 etc.or we can provide the muc firmware only.
Internal IR Module		We can design all kinds of pcb layout according to the customer's requirements. PCB size, IR output interface type(COM,USB,I2C..)
COM(RS232,Serial Port)		Serial port format, such as "9600,n,8,1", the RS232 level, RS232 standard, or TTL level.
PS/2 Keyboard		PS/2 interface, keyboard only Every key function is programed for Keyboard function, single key or comb key such as "ctrl-alt-p"
PS/2 Kyeboard and Mouse		Dual PS/2 interface Every key function is programed for Keyboard function, single key or comb key such as "ctrl-alt-p" mouse supported.
USB		support usb keyboard and mouse (HID device)

An infrared receiver board mounted inside the chassis or front panel (RCD series)

CIR3: ps/2 keyboard+mouse, com/rs232 and usb (need to add ps2-usb module)
1,ps2: 5x2pin or 6x1pin Optional
2,usb: 4x1pin
3,rf(2.4g): for future

LED
1,LRC: Remote operation led
2,LNUM: keyboard numlock led
3,LCAPS: keyboard caps led
4,LHD: hard disk led
5,LON: power on led

Support equipment
1,any infrared remote control
2,any infrared keyboard
(Processing required by the customer)

Features
1,Do not need to power on keys
2,Power on with remote control "power key" or any key of keyboard customer specified

CIR4: ps/2 keyboard+mouse, com/rs232 and usb
pcb size: 62x36

1,ps2: 5x2pin or 6x1pin Optional
2,usb: 4x1pin
3,rf(2.4g): for future

LED
1,LRC: Remote operation led
2,LNUM: keyboard numlock led
3,LCAPS: keyboard caps led
4,LHD: hard disk led
5,LON: power on led

Support equipment
1,any infrared remote control
2,any infrared keyboard
(Processing required by the customer)

Features
1,Do not need to power on keys
2,Power on with remote control "power key" or any key of keyboard customer specified

infrared extend cable, up to 5000mm with IR sensor (3pin)

infrared receiver solution

Designed for STB VOD in hotel
Control TV set in hotel romm
Control STB in hotel room
Only use one RCU!

Add 2rd infrared sensor receiving point.

An infrared receiver board mounted inside the externel receiver box (RCD series)

Universal Infrared Receiver Model RCD1 for RS232,Serial,COM,PS-2 PortPort
Model: RCD1
Input: 36k,38k,40k,56k universal infrared
Output: RS232, Serial Port, COM Port or PS/2 Port data stream
Connectort: 4pin connector, length 1500mm
Dual IC (decode) support: DIP and SOIC (firmware custimzed)
Size: 50x50(mm)

@2003-2022, Teket Innovation Technology Company Limited, ICP No: 05050856
BEIJING: 2004, 20/F, Building 2, 1 Information Road, Shangdi, Haidian, Beijing 100085, China
Tel: 0086-10-82894738¡¡Fax: 0086-10-82893738
HONG KONG: Room 504, President Commercial Centre, 602-608 Nathan Road, Mongkok, Kowloon, Hong Kong
Tel: 00852-2781-6070¡¡Fax: 00852-2781-6078

teket@teket.com or teket@bbn.cn